Installation instructions
Built-in variants of gas hob
Dials
1014402-R05
14/08/2019
1014402-R05
3
Surface-mounted installation
The layout of the hob to be fitted may differ from the hob illustrated!
Y
Y
H
Y – Y
B
Drawer/
cabinet
Side panel
A
S*
≥81
T
≥90
Ri
Ra
600
560±1
490
±1
≥5
0
≥50
A
600
H
50
1
571
GAS641GSAZ (31089)
≥50
H
Y
Y
501
691
Ri
GAS731GKBZ (31075)
A
490±1
≥5
0
600
Ra
680±1
600
* The required clearance must be observed!
Type
A Depends on producer
B
H
Corner radius Ra/Ri
GAS641GKAZ, GAS731GKBZ
≥30 mm
≥95 mm
84 mm
0–5/1.5 mm
A
Worktop depth
B
Required clearance for service replacement
H
Dimension from the top of the work surface to the underside of the gas connection
Ri
Corner radii of appliance for base plate
Ra
Outer corner radii of cut-out
S
Minimum distance between the top of the work surfaces and any drawer
T
Minimum distance between the cut-out in the back and any drawer
Installation
Do not damage the sealing bead.
The sealing bead must lie all around the edge of worktop.
▸
Create an accurate installation cut-out.
▸
Carefully put the appliance in the installation cut-out and press against the worktop with sufficient overlap.
▸
Fit the four adjusting braces along the circumference of the appliance to the bore holes provided and tension the appliance against
the worktop.
Combination installation
Surface-mounted combination installation is described in document 1013773. The intermediate support 1014361 or 1019199 is re-
quired for this.
