![background image](http://html1.mh-extra.com/html/v-zug/296/296_installation-instructions_3096252002.webp)
Installation instructions
Heat pump dryer
One-family household
J296.113-0
25.6.08 ITH
2
A
Open the appliance door and the cover.
– The identification plate is located bottom right behind the cleaning cover.
The necessary installation accessories are located in the drum.
Installation plate (W5.0542)
incl. screw material (
S
) and double-sided adhesive tape
The room must be well ventilated to ensure that the room temperature does not exceed 35 °C.
If the volume of the room in which the appliance is located is at least 20 m³ when closed:
Condensation may form on thermal bridges!
The room must be aired (by opening the door to or a window in the room) between consecutive drying programmes!
If the volume of the room in which the appliance is located is less than 20 m³:
There must be air inlet and outlet openings (open window, ventilation grille or slits in the door, ventilation system) to the adjacent room
or to the outside.
A
Raise the appliance slightly at the front and pull it forward, away from the installation plate.
A
Secure the installation plate to the location you wish to install the appliance using 4 screws. On smooth and clean floors, you can
affix the installation plate (double-sided adhesive tape supplied).
A
Dampen the mounting slots on the installation plate with water.
Identification plate
Installation accessories supplied
Article
Article no. Number See installation step
Condensate drain kit W5.5845
1
4. Connect condensate drain
Room conditions / ventilation
Do not obstruct the appliance’s ventilation slits to ensure that there is an ample supply of air.
The room temperature should be kept as low as possible to ensure the economic running of the appliance. Critical is a room
temperature of 35 °C and over. This prolongs the duration of the programmes.
Installation
Work steps 1–5 must be carried out in full in the order specified.
1. Positioning the installation plate
Use the installation plate to install the appliance. This plate fixes the appliance in position (for both free-standing appliances
and appliances placed in a niche).
S