V-TUF XR11000, Operator'S Manual, Page: 8 / 18

8
INTRODUCTION
Thank you for purchasing a product from the V-TUF Industrial Cleaning Equipment range.
V-TUF is focused on research and development to make sure you are fully satisfied with your purchase.
Please read this manual carefully and follow the instructions to ensure you get the best
performance from this machine.
Congratulations on your choice and we trust you will obtain satisfaction from using it.
IMPORTANT POINTS TO NOTE AT ALL TIMES!
1. Always ensure you are using the correct combination of filters for the task you are on.
(See page 4.)
2. If you experience vacuum loss, please clean the filters, check & clear the blockage in the suction
line, and blast the vacuum head vents with air, so you have maximum suction power.
(See page 4 & 5.)
3. Do not leave the vacuum motors running if there is loss of suction, as they can overheat.
4. After every hour of use especially when vacuuming dry flammable dust, blast the filters clear with
an airline and blast the vent areas in the vacuum head to clear any build-up of dust. (See page 4 & 5.)
5. Never use standard extension cords on the 240 volt machines, as these are not sufficient for three
motor operation and can burn the motors out – use the ‘Motor saver’ extension cords (see page 14)