DE35-ST Operating Instructions
D292469I
117
Needle Replacement & Planarization of 0.75 inch
diameter (small) Eject Heads
Removal of broken needles
Note:
If there are no broken needles, there is no need to remove eject head body.
Loosen the eject needle setscrew(s) on the piston, remove the eject needle(s) from the
bottom of the piston, replace and planarize. See step 7.
1.
If the Eject Head includes Integrated Vacuum Gallery (EJA), loosen the two small set
screws around the body clamping the two cylinder halves together. Remove
threaded vacuum chamber.
EJA
style
Eject Needles Springs
Piston Stainless Steel Ball
Plunger
O-ring
Plunger Needle Set Screws
Summary of Contents for Royce DE35-ST
