V-TEK OEM TM-50 SMD, User Manual

Page: 49 / 112

61685321.fm Setup
Chapter 3: Setup and Operation 35
2. Mount the bulk Carrier Tape Reel on the spindle so the
tape unwinds from the top and the sprocket holes of the car-
rier tape are on the inside for tape widths less than 32mm.
Tapes wider than 32mm have holes on both sides. Usually, the
outside holes of these larger carrier tapes are slightly oval in
shape.
t
3. Replace the Quick Lock and position it so the reel is sup-
ported and spins freely on the spindle with little or no drag.
4. Trim the end of the carrier tape so it is clean and straight.
Route the Carrier Tape
1. Guide the carrier tape into the Loading
Track .
2. Begin by routing it over the Tape Guide
that is situated below the loading track.
Figure 3.4
Figure 3.5
Figure 3.6