-13-
Tonch the [Management
Fingerprint] In the standby mode;
It will enter the state of user
fingerprints setting
.
LED 1 LED 2 Buzzer
beep+,beep
(green)
(off)
7.1 Add User Fingerprints
Touch new fingerprint you need,
get on the first time identified.
LED 1 LED 2 Buzzer
beep+,beep
( green,
flash 3 times)
Success:
(blue)
LED 1 LED 2 Buzzer
beep,beep,beep
( red,
flash 3 times)
Failure:
(off)
Touch new fingerprint you need,
get on the second time identified.
LED 1 LED 2 Buzzer
beep+
( green,
flash 3 times)
Success:
(off)
LED 1 LED 2 Buzzer
beep,beep,beep
( red,
flash 3 times)
Failure:
(off)
Note:
1)In the second identified,
regardless of success or failure, the system will
return to the operation of first identified, you can continue to add new fingerprint;
2)In all steps, if there isn’t any operation within 10s, or press Call button, it will exit the
setting, and the color of LED1 turns to red, and the buzzer sounds "beep, beep+".
User fingerprints will serve as a unlock credential for user. The
system can store 200 user fingerprints.
7. Register User Fingerprints
Press "KEY1" button,
It will enter
the state of add user fingerprints
setting
.
LED 1 LED 2 Buzzer
beep+,beep
(off)
(flash slowly)
(flash
slowly)
(flash
slowly)
(flash
slowly)
(flash
slowly)
