Telephone operation
39
Volume control
On a handset:
During a call, press
VOLUME/
or
VOLUME/
to
adjust the listening volume.
On a handset:
During a call, press
+/-/VOLUME
on the side of the
headset to adjust the listening volume. You hear an in-ear
beep while adjusting. If you turn off the key tone, the in-ear beep will not be heard.
The handset earpiece, headset earpiece and speakerphone volume settings
are independent.
When the volume reaches the minimum or maximum setting, you hear two beeps.
Mute
The mute function allows you to hear the other party but the other party cannot
hear you.
On a handset:
During a call, press
MUTE
. The handset displays
Muted
until the mute function is turned off.
Press
MUTE
again to resume the conversation.
The handset displays
Microphone ON
briefly.
On a headset:
During a call, press
MUTE
. The headset announces,
“Mute on.”
The headset beeps every 30 seconds
until the mute function is turned off.
Press
MUTE
again to resume the conversation.
The headset announces,
“Mute off.”
Hold
You can place a home or cell call on hold. You will hear an alert tone if you have not
taken the call off of hold after 14 minutes. You will hear another alert tone
30 seconds later. At 15 minutes on hold, the call on hold automatically disconnects.
To place a home call on hold:
Press
HOLD
. The handset displays
Home on hold
and
/HOME/FLASH
flashes.
To resume a home call on hold:
Press
/HOME/FLASH
.
To place a cell call on hold:
Press
HOLD
. The handset displays
Cell X on hold
and the
CELL 1
or
CELL 2
key flahses.
To resume a cell call on hold:
Press the corresponding
CELL
key.
•
•
•
•
•
•
•
•
•
•
•
•
