2. Operation Instructions
3. Setup Instructions
1) Door opening function:
When visitor calls from outdoor station, the monitor rings,
pick up handset to talk with the visitor, then press the
Unlock
button to open the door.
If the system connect 2 locks,press
Unlock 2nd
button to open the second door.
2) Monitoring & calling menu:
Pick up handset in standby mode,the LED will be
shown a scroll information “Intr Call”,pressing
Up
button or
Down
button can stop the
scroll. To quit this menu, please tap
Cancel
button.
3)
Entrance monitoring:
In monitoring & calling menu page, the LED show "ds-
x"(x=1~4,refer to part 3-Numbers of door station),it means that the monitor select "x"
door station to monitor. Press
Up
/
Down
button to increase/decrease the value,then
press
Menu
button to activate the monitoring.
4) Inner call:
In monitoring & calling menu page, use
Up
/
Down
button to select
"-ALL" item on LED,then press
Menu
button to activate the inner call,all monitors
connected to the system will ring at the same time. Pick up any monitor,the others will
stop ringing immediately.(note that the user code must be the same for all monitors to
activate the inner call function)
5) Intercom call:
In monitoring & calling menu page, use
Up
/
Down
button to select
"C-xx" (xx=00~31,refer to part3-Numbers of indoor monitor)item on LED,then press
Up
/
Down
button to increase/decrease the value,and press
Menu
button to confirm the
intercom calling.(note that the user code must be different for all monitors to activate
the intercom call function)
Press
Menu
button and hold for 2s in standby mode,the LED will be shown a scroll
information "User Set-",press
Up
button or
Down
button to stop the scroll,and the LED
show the setting items. Press
Menu
button to select next setting items. To quit this set-
ting menu, please tap
Cancel
button.
Setting
Item
LED
state
Description
Default
Door station
call tone
1-xx
Set the ring tone calling from outdoor station. Total
12 pieces ring tones can be selected(xx=01~12),press
Up
button or
Down
button to increase/decrease the
value,settings will be performed immediately.
02
Intercom
call tone
2-xx
Set the ring tone calling from intercom call or
inner call. Total 12 pieces ring tones can be
selected(xx=01~12), press
Up
/
Down
button to in-
crease/decrease the value, settings will be performed
immediately.
12
