1. When the door opening
(>5cm), the lights will be
turned on.
2. When both of the 2 doors
being closed, the lights will
be turned off
WIRING DIAGRAM
INSTALLATION
Turn on the Power, when you open 1 door or 2 doors, the sensor detects the motion and turns on
the lights. The lights will be switched off until both of the 2 doors are closed.
Within the detection field, there shouldn’t be any hindered or unrest objects affecting detection.
1. Switch off the power.
2. Install the product on the wall with two enclosed inflated
screws.
3. Connect the sensor with power supply and the load as per the
connection-wire diagram. Then turn on the power and test it.
To get better sensitivity, you can
paste one silver label as picture
on the door facing to the sensor
TEST
NOTE
WARNING
1. Please make sure to turn off the power before starting the installation.
2. Installation must be performed by a qualified electrician.
3. Cover or shied any adjacent live components.
4. For indoor use only.