V-TAC VT-8051 Instruction Manual Download Page 1

INFRARED SENSOR

INSTALLATION ADVICE

TECHNICAL DATA

FUNCTION

INTRODUCTION & WARRANTY

Thank you for selecting and buying V-TAC product. V-TAC will serve you the best. Please read these instructions carefully before 

starting the installing and keep this manual handy for future reference. If you have any another query, please contact our dealer 

or local vendor from whom you have purchased the product. They are trained and ready to serve you at the best.The warranty 

is valid for 2 years from the date of purchase. The warranty does not apply to damage caused by incorrect installation or abnor-

mal wear and tear. The company gives no warranty against damage to any surface due to incorrect removal and installation of 

the product. This product is warranted for manufacturing defects only.

 

   

INPUT VOLTAGE

SKU

MODEL

220-240V/AC

1356

VT-8051

POWER FREQUENCY

50/60Hz

AMBIENT LIGHT

<3-2000LUX (adjustable)

TIME DELAY

Min.10sec±3sec                  

Max. 15min±2min                 

RATED LOAD

1200W (Traditional Lighting)

300W (LED Lighting)

DETECTION RANGE

360°

DETECTION DISTANCE

6m max(<24°C)

WORKING TEMPERATURE

 -20~+40°C

WORKING HUMIDITY

<93%RH

INSTALLING HEIGHT

2.2-4M

POWER CONSUMPTION

Approx 0.5W

DETECTION MOTION SPEED
CUT-OUT SIZE

0.6-1.5m/s
Ø61.5mm

• Can identify day and night: The consumer can adjust working state in different 

ambient light. It can work in the daytime and at night when it is adjusted on the 

“sun” position (max). It can work in the ambient light less than 3LUX when it is 

adjusted on the “3” position (min). As for the adjustment pattern, please refer to the 

testing pattern. 
• Time-Delay is added continually: When it receives the second induction signals 

within the first induction, it will restart to time from the moment.

Good sensitivity

Poor sensitivity

As the detector responds to changes in temperature, avoid the following situations:
• Avoid pointing the detector towards objects with highly reflective surfaces, such as mirrors etc.
• Avoid mounting the detector near heat sources, such as heating vents, air conditioning units, light etc.
• Avoid pointing the detector towards objects that may move in the wind, such as curtains, tall plants etc.

INSTRUCTION MANUAL

Reviews: