Step 2
：
Connect to AP network
Click "Go to connect" and find the right
"AP_XXXXX" network
(XXXXX Refers to logger SN).
If the password is required, you can
find the password on the logger body.
Go back to VTAC Smart HOME APP,
after connecting to AP network.
Step 3
：
Auto Configuration
Please wait for a while to complete the
configuration. Then system will switch
to the following page.
Click "Done" to check plant data.
(Usually, the data will be updated in 10
mins)
If configuration failure occurs, please check the following reason and try it again.
(1) Make sure WLAN is ON.
(2) Make sure WiFi is normal.
(3) Make sure wireless router does not implement the white-black list.
(4) Remove the special characters in Wi-Fi network.
(5) Shorten the distance between the phone and device.
(6) Try to connect to other Wi-Fi.
Warning:
Please make sure the WIFI Module is working properly before you leave the site. If there is
anything abnormal,please do not leave the site and contact customer service: support@v-tac.
eu.
