V-TAC VT-521 Installation Manual Download

Page: 2 / 4

INSTALLATION:

• Provide power to the required point of installation,

• Cut a suitable aperture in the ceiling as per the cut-out details in Fig 1 ensuring that it

does not infringe with electrical cables, water/gas pipes or ceiling joists

• Connect the battery to the inverter via the plug and socket provided

• Connect the live and neutral to the push ﬁt terminals on the PCB of the inverter (Fig 3)

• Remove 2 screws on top of the ﬁtting (see Fig 2)

Fig1

Fig2

Remove screws

Cable entry point

Summary of Contents for VT-521

Page 1: ...IEE Wiring Regulations BS7671 Please isolate mains prior to installation maintenance Check the total load on the circuit including when this luminaire is tted does not exceed the rating of the circuit...

Page 2: ...1 ensuring that it does not infringe with electrical cables water gas pipes or ceiling joists Connect the battery to the inverter via the plug and socket provided Connect the live and neutral to the...

Page 3: ...e indicator status LED is illuminated Twice yearly conduct a one hour duration test simulate a mains supply failure for one hour continuous test by operation of key switch or switching o circuit break...

Page 4: ...ducts or solvents which may damage the tting GUARANTEE This product is only guaranteed against defects in manufacture The warranty is valid for two years from date of purchase The warranty does not co...