V-TAC VT-25 Installation Instruction Download Page 4

1. Before installing please remove all the parts to check if all are in good condition or not. 
2. The floodlight is connected to the solar panel against the sun light. Please makes sure 
the solar panel is adjusted in correct angle inorder to receive sunlight. 
3.The remote control is designed with a operation distance of 8-15m
4. A. The lamp comes with two inflated studs as shown in the parts included section.
    B. The solar panel Angle must be adjusted in correct direction to receive sunlight.
    C. Lamps can mot be installed in low-lying areas ,so as not to soak; 
5. Plug the male and female plugs and tighten the waterproof cap and install it. 
6. After installation test the light using the remote control.

• Do not use solvents, petrol, etc. Otherwise the light will be damaged.
• Clean the light with a dry, lint-free cloth. 
• Check the solar panel for dirt regularly. If dirt or is present remove it to guarantee flawless 
   function of the product.
• Especially during the winter, keep the product free from snow and ice.
• Confirm installation direction is correct (solar panel should be at top)
• Confirm no objects blocking the solar panel to receive sunlight
• Keep away from the fire.
• Don't immerse in the water

Disposal:
T

o help protect the environment, please dispose of the product properly when it has reached 

the end of its useful life, do not throw in the garbage. Information on collection sites and their 

opening hours is available from your local authority. Contact your local waste management 

authority for additional information on how to dispose of the used product.

Installation Guide

Maintaineance & Warning

 

In case of any query/issue with the product please reach out to us at [email protected]

V-TAC EUROPE LTD, Bulgaria, Plovdiv 4000, bul.L.Karavelow 9B

Reviews: