Step 7: Choose ‘Ligh�ng’ to start pairing
the light to the app.
Step 8: To pair the device with LED Smart Strip Light make sure the light is blinks rapidly.
Once the light blinks rapidly, the light is in pairing mode. If the light is not blinking rapidly, you
can do one of the following steps:
A. Switch the light on & off repeatedly for 3 �mes, with short intervals of less than 2 seconds.
B. Tap the ‘How to make light blink rapidly’ link (as shown on the image to the right)
C. You can also enable pairing mode from the Wi-Fi controller. Press and hold the ON/OFF
bu�on for 5-7 seconds and wait �ll you observe the light flashing. Please refer to the instruc-
�on sec�on "WI-FI CONTROLLER FUNCTIONS"
Network Modes:
1) Smart Mode: Light flashes rapidly.
2) AP mode: Slow flash, once every 2 seconds.
Confirm if the light blinks rapidly, select the Wi-Fi network, and enter the password.