V-TAC VT-20201ST, Installation Instruction, Page: 2 / 2

LED SOLAR STREETLIGHT
INTRODUCTION & WARRANTY
TECHNICAL DATA
Thank you for selecting and buying V-TAC product. V-TAC will serve you the best. Please
read these instructions carefully before starting the installation and keep this manual
handy for future reference. If you have any another query, please contact our dealer or
local vendor from whom you have purchased the product. They are trained and ready to
serve you at the best. The warranty is valid for 2 years from the date of purchase. The
warranty does not apply to damage caused by incorrect installation or abnormal wear and
tear. The company gives no warranty against damage to any surface due to incorrect
removal and installation of the product. This product is warranted for manufacturing
defects only
WARNING!
1. Please make sure to turn off the power before starting the installation.
2. Installation must be performed by a qualified electrician.
3. The light source of this luminaire is not replaceable, when the light source reaches its
end of life the whole luminaire should be replaced.
4. If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively
replaced by the manufacturer or his service agent or a similar qualified person in order to
avoid a hazard.
5. Replace any cracked protective shield.
2
YEA
RS
WARRANTY
*
INSTALLATION GUIDE:
MAINTENANCE &WARNING
PARTS INCLUDED
REMOTE CONTROL MODE FUNCTION
INSTALLATION
1. Before installing please remove all the parts to check if all are in good condition or not.
2. Please makes sure the solar light is adjusted in correct angle in order to receive sunlight.
3. The remote control is designed with an operation distance of 6-8m
4.
A. The lamp comes with 3 inflated studs.
B. Solar light cannot be installed in low-lying areas, so as not to soak.
C. Installation can be mounted through wall or pole.
5. After installation test the light using the remote control.
Mode 1: Press induction button to make
it enter into sensor mode when object
walk into the detective area lights turn
on automatically; when object walk out
of the detective area, 15 seconds
later,lights keep 20% brightness.
Mode 2: Light will turn on all the time
until power off or during the day.
• Do not use solvents, petrol, etc. Otherwise the light will be damaged.
• Clean the light with a dry, lint-free cloth.
• Check the solar panel on the back of solar light for dirt regularly. If dirt or is present
remove it to guarantee flawless function of the product.
• Especially during the winter, keep the product free from snow and ice.
• Confirm installation direction is correct (solar panel should be at top)
• Confirm no objects blocking the solar panel to receive sunlight
• Keep away from the fire.
• Don't immerse in the water
NOTE: The battery must be fully
charged before using 3-5 rainy days
REMOTE CONTROL SENSOR
IN CASE OF ANY QUERY/ISSUE WITH THE PRODUCT, PLEASE REACH OUT TO US AT: SUPPORT@V-TAC.EU
FOR MORE PRODUCTS RANGE, INQUIRY PLEASE CONTACT OUR DISTRIBUTOR OR NEAREST
DEALERS. V-TAC EUROPE LTD. BULGARIA, PLOVDIV 4000, BUL.L.KARAVELOW 9B
20
PAP
This marking indicates that this
product should not be disposed
of with other household wastes.
Non-replaceable
light source
Non-replaceable
control gear
Expansion screws (4Pcs) U-Frame Remote Control Solar Light
Press once:100% brightness
Press twice:50% brightness
Press three times: Red and
blue flash
Force to turn on
Increase Brightness
Charging Display
2 Hours Regular
4 Hours Regular
50% Brightness
100% Brightness
Decrease Brightness
Force to turn-off
AUTO MODE
Lights on at night
Lights off in the day
6 Hours Regular
IP65
RATING
Solar Charging
(The battery is in the lamp housing)
Internal six angle
screw fixation
Light pole
Screw fixation
Arm
Light source
Human remote
control module
MULTI-LANGUAGE
MANUAL QR CODE
Please scan the QR code
to access the manual in
multiple languages.
MODEL VT-20201ST VT-30301ST VT-40401ST
AUTO ON MODE 1400 2000 2200
SENSOR MODE 2300 3500 4300
WATTS 200 350 400
SOLAR PANEL WATTS 33 40 50
DC: VOLTAGE 3.2V 3.2v 3.2v
CHARGING TIME 4-6H 4-6H 4-6H
WORKING TIME 8-10H 8-10H 8-10H
BATTERY CAPACITY 30 Ah 40 Ah 60 Ah
DIMENSION 680x320x50mm 900x320x50mm 1000x320x50mm
BEAM ANGLE 120° 120° 120°
BODY TYPE
POLYCRYSTALLINE SILLICON PANEL