APP INSTALLATION
INSTALLATION
Step 1: Disconnect the power supply and
install the lamp.
Step 2: Turn the power ON to test the lamp.
Step 3: Enable WI-FI and bluetooth on your
phone device.
Step 4: Scan the given QR code, or download
“V-TAC Smart Light” from the App Store (iOS)
or the Google Play Store (Android).
PROCESS
1. Solar panel: connect panel to camera, fix a suitable angle with screws
2. SD card installa�on: open thesilicon flap and insert the SD card, then make sure to close the
slicon flap to avoid rain leakage
3. insert TF card, then �ghtening the screws.. Power cable connect the cables between the
panel and camera, then �ghtening the waterproof cap.
4. Panel power-on: Remove the rubber of panel,make sure it is
power on. Then put the rubber back to the panel.
For ANDROID
For IOS
