V-TAC SMART LIGHT VT-5556, Instruction Manual

Page: 8 / 142

Signal Indicator
DC Connector
Charging Electrode
HEPA Filter
HEPA Filter Cover
Conductive Shrapnel of the Dust Box
Prefilter
Dust Box Metal Sheet
Side Cover of the Dust Box
Water Inlet
Water Tank
Mopping cloth
Water Tank
Dust Box
Docking Station
• Before using this device, pick up objects like clothing and
loose paper. Lift up cords for blinds or curtains, and move
power cords and fragile objects out of the way. If this device
passes over a power cord and drags it, an object could be
pulled off a table or shelf.
• If the room to be cleaned has a balcony, a physical barrier
should be used to prevent access to the balcony and to
ensure safe operation.
• Do not place anything on top of this device.
• Be aware that this device moves around on its own. Take
care when walking in the area where this device is operating
to avoid stepping on it.
• Do not operate this device in areas with exposed electrical
outlets on the floor.
• Do not expose the electronics of this device, its battery, or
the integrated Charging Base. There are no user-serviceable
parts inside.
• Do not use this device on an unfinished, unsealed, waxed or
rough floor. It may result in damage to the floor and this
device. Use only on hard floor surfaces or lowpile carpet.
• This device has been designed to be used on floors without
scratching them. We still recommend that you test this device
on a small area of the room to be cleaned to ensure no
scratches are made before cleaning the whole room.
Product Composition / Part Name
8