INSTALLATION :
SAFETY INSTRUCTION :
1. To fix the screen, first make a stable steel structure (The backside of cabinets need to have protection).
2. Connect the cabinet to each other,one by one.
5. Connect the main power cable from the power box to the screen.
6. Connect the main signal cable from the computer to the screen.
7. Ensure that all the connections have been made properly. Then, turn on the power.
8. Insert the sending card in the CPU. Now install the software, and start the setup for the control system.
3. To fix the cabinet with the steel stucture, use the U-shaped steel connector. The connector can be used to join the cabinets
with the help of screws.
4. Now connect the signal & power cable (in & out) from cabinet to cabinet.
Please ensure that you read all the safety instructions before installing this product.
This product is intended for professional use only.
Fire, electric shock or dropping the product may lead to severe injuries, or even death.
Warning : The cabinets are heavy. Be careful in order to avoid injuries.
Warning : Beaware of shock!
Switch off the power before cabling or wiring, or before connecting or disconnecting any part of the product.
The mains switch should be located nearby the product, and in an obvious & easy-to-reach place, so that power
can be disconnected as soon as possible, in case a failure arises.
Install the product only in an even and stable area.
After succesfully assembling the display, check to ensure that the power wiring is in a good condition.
Warning : Beaware!
The installation location of the displays needs good ventilation . Do not hang anything on the display.
Warning! Wear a crash helmet, so as to avoid any injuries.
Please pay attention to the Visual Distance, and avoid watching the screen closely, for a prolonged period, so as to
avoid any damage to the vision.