the current time for initial timing time, xx is the gap time, and sends the
confirmation SMS to the sender’s mobile phone (TIMER START, REPEAT
INTERVAL :< X>MINUTES). Then start to time and send the format as 1.4
setting information when it arrives the gap time, the information state item
automatically updates STATE: TIMER. When “xx=00”, cancels the positional
information in fixed time instruction, and sends the confirmation SMS to the
sender’s mobile phone “TIMER STOP”.
Note:
The state set by this directive in the next boot after the shutdown is still
valid
，
once again received the directive could be changed again changes, reset
configuration reset.
After factory set or reset, timing upload is stop.
1.6 Telephone localization function
Explanation:
One of 3 telephone numbers stored in advance calls in, and
hangs up after ringing 2-5 times, then the 205 will send the location
information in form of 1.4 to this number, the information state item
automatically updates STATE: CALL.
1.7 Seeking help initiatively
When press the key more than 3 seconds, it will make vibration and send the
location information such as 1.4 to 3 telephone numbers stored in advance, the
information state item automatically updates STATE: SOS. At the same time,
call the first user telephone number. If it is unsuccessful (closed or unable to
connect or no response), makes vibration and starts calling the second and the
third in turn.
1.8
Function of answering and ending calls (active calls,
automatic answer, end)
Note: When one of the stored phone numbers of calls come in, the user can
take the initiative to press SOS button, or automatically after ringing 10 seconds
17
