10.1set up
Option
Description
operating
mode
DMX
Slave state: receive DMX signal from console
or host
AUTO
Master status: self-propelled and send DMX
signal to slave
voice
control
DMX address 1~512
Press the "OK" key to enter the editing state. At
this time, the hundreds digit is selected, and the
"up" and "down" keys are pressed to change
the address code. Press the "OK" key again to
select ten edits. Press the "OK" key again to
select the one digit editing. Press again to exit
the editing state
Motor reset
close
open
Led reset
channel mode Standard
21CH
Standard 21-channel mode
X reverse
close
open
Y reversal
close
open
XY swap
close
open
Swap the channels of the XY axes (including
fine-tuning)
XY encoder
open
Use the encoder (optical coupler) to judge the
out-of-step and automatically correct the
position
close
Correct position without encoder (optocoupler)
DMX signal
Keep
Continue to operate as it is
clear
The motor returns and stops running
restore default
settings
Press the "OK" button to see the confirmation
dialog box, press the "OK" button again to
restore the default settings
