Version 06.04.2017
CI-VL2-SY2-N
P
a
g
e
5
1.3.2.
CAN-bus box
The CAN box reads the vehicle’s digital signals out of the vehicle’s CAN-bus and converts
them for the video interface.
1.3.2.1.
Dip-switch settings
Some settings have to be selected by the dip-switches on the
video interface. Dip position down is ON and position up is OFF.
See the following chapters for detailed information.
1.3.2.2.
Enabling the interface’s video inputs (dip 1-3)
Only the enabled video inputs can be accessed by switching through the interface’s video
sources. It is recommended to enable only the required inputs, because the disabled inputs
will be skipped while switching through the video interfaces inputs.
Dip
Function
ON (down)
OFF (up)
1
RGB-input
enabled
disabled
2
CVBS AV1-input
enabled
disabled
3
CVBS AV2-input
enabled
disabled
4
RGB-input resolution
VGA 800x480
RGB NTSC
1080p H+V sync
5
Rear-view cam type
after-market
factory or none
6
No function
-
Set to OFF
7
No function
Set to OFF
8
