manualshive.com logo in svg

V.I.O POV.1, User Manual

Share
Download
V.I.O POV.1 User Manual Download Page 45

Changing the Remote I.D. Channel

 45

 

• 

• 

• 

•

•

•

The POV.1 and wireless remote control are shipped with both of their 
REMOTE I.D.’s set to channel 0. There are a total of 10 available REMOTE 
I.D. channels that you can use to allow multiple POV.1's and their remote 
controls to be used in close proximity without interference.

To change the REMOTE I.D. channel of the POV.1 Recorder:

1. Press the 

SETTINGS

 button 

2. Press the 

PREV

 or 

NXT

 soft keys until 

REMOTE I.D.

 is shown in the 

display and press 

SELECT

3. Press 

PREV

 or 

NXT

 until the desired channel is displayed and press the 

SELECT

 soft key to choose that channel.

The REMOTE I.D. channel of the wireless remote control is set using a 
small rotary dial located inside the remote control. To adjust the channel you 
will need to open the remote control unit.

To open the remote control and adjust its I.D. setting:  

4. Place the remote on a flat surface with the buttons up 
5. Unscrew the four small Phillips screws and lift the cover from the remote 
6. Use a small flat blade screwdriver to carefully rotate the pointer to the 

desired setting. Take care to protect the inner workings of the remote 
from dust and moisture while the cover is removed 

7. Replace the cover, tightening the four screws uniformly to create even 

pressure against the seal

Summary of Contents for POV.1









































































Reviews:

No comments

Brands by name

Popular brands

Load more brands