VSL3.780.047
Issue 1.01
V-GREAT GLOBAL CORPORATION
Installation and Operation Manual V1.01
VG-6633 Conventional Heat Detector
When multiple detectors are connected with a
remote indicator, a diode 1N5819 should be connected
to Terminal 4 of VG-6611 orientation base in series
before going to the positive of the remote indicator.
System composition is shown in Fig. 5.
Fig. 5
O
-
O
+
Conventional Detector
Remote
Indicator
Diode
Conventional Detector
Diode
Output loop of VC-6831 conventional control panel can
be connected with up to
30
non-addressable field
devices. The control panel features loop checking.
When the loop is broken, the panel will send fault signal
for warning.
Reed Switch Testing:
Put commission tool neat the LED on the detector for
3 to 5 seconds.
Reed Switch Testing
Commission
Tool
LED
Maintenance
1. The detector should be installed just before commission and kept well before installation, taken corresponding
measures for dust-proof, damp-proof and corrosion-proof.
2. Protect the metal component on the PCB against damp and improper distortion.
3. Fire simulation test should be made to the detector at least once half a year
Specification
Operating
Voltage
9VDC
～
28VDC
Static Current
≤60μA
Alarm Current
10mA≤I≤50mA
Fire LED
Red. Flashes once every 2s~4s
in normal state; Illuminates in
alarm.
Remote
Indicator
Directly connects with remote
indicator (internal 10
kΩ resistor
in series output power supply
voltage) Quiet in normal state,
flashes in alarm.
Max. ripple
voltage
2V(peak to peak value)
Alarm reset
Instant power down (2s Min,
1.0VDC Max
Power-up Time
≤10s
Wiring
Polarized two wire
Class
A2R
Ingress
Protection
Rating
IP32
Ambient
Temperature
-10
℃～
+55
℃
Relative
Humidity
≤95%, non condensing
Material of
Enclosure
ABS
Dimensions
Diameter: 100mm
Height: 43mm
（
without base
）
Mounting Hole
Spacing
65mm
Weight
About 120g
Accessories & Tools
Limited Warranty
We will repair or replace any properly used product that fails to operate due to material or craftsman defects within the warranty period.
Any failure caused by intentional damage, improper use or tamper falls outside of this warranty and we are not responsible for any such
consequence. Anybody, including agents, distributors and employees, is not authorized to alter the contents of this warranty. Please
contact your local distributor for products that are not within the scope of this warranty.
Company name
：
V-GREAT GLOBAL CORPORATION
Add:Second Floor, Capital City, Independence Avenue, P.O. Box 1008, Victoria, Mahe, Seychelles
Model
Name
Remarks
VG-6611
Base
Order separately
