3
To complete the circle apply
downward pressure
at this time.
This will allow the two remaining pieces to be joined
together. All parts should be bolted together at each coupler
with the ¼” bolt and lock nuts before continuing.
Tube Net Application
Once the frame is complete and
the center hub is attached, take
the net and stretch it around the
frame keeping the thick black rope
edge along the
(outer edge)
of the
frame and the white bungee cord
toward the inside of the circle.
This step may require a little
patience since the bungee is quite
tight.
The
final
and
most
important step to the net attachment is tying
the outer edge
to the frame
using the 12” black poly ties provided. We
recommend placing them 12” to 16” apart. At this time tie
the two ends of the net together just above the hub using the
ties also. Cut all loose ends to ensure a neat looking piece of
training equipment.
Base to Frame Assembly
Use the two 5/16 “bolts, nuts and
washers to secure the base to the
frame. The direction of the frame
should be in a direction that
places the plastic tubing that is
inside the white heat shrink
opposite the side with the 3 cross
pieces on the base. Place the unit
in its upright position. (
Tighten all
nuts & bolts of the base at this
time)
while making sure the base
is squarely positioned on the
ground.