LUBRICATION and MAINTENANCE
The moving parts in your Exercise Bike are all pre-lubricated at
assembly and should not require further attention. We recommend
however that the cycle is used inside and stored in a dry condition. To
clean the metal and plastic components, a general household cleaner
can be used, but please be sure to dry the cycle and any attachments
before use.
In the interest of safety, do NOT
use polish or any lubricant on
the foam handgrips, saddle or
pedals.
Note
Operating Adjustments
EXERCISE MONITOR FUNCTIONS
With your Exercise Bike the single screen, 5 function Exercise
Monitor is set to start automatically when you begin to cycle.
However, it is possible to switch on the monitor by pressing the
Mode Button at the bottom of the monitor. To save battery
consumption, the monitor will also switch off after it has been idle for
approximately four minutes.
Please refer to the leaflet supplied with the Exercise Monitor for all
operational functions.
Page 1
5