Assembly
Page 17
Family Trampoline
REMEMBER TO USE GLOVES DURING ASSEMBLY TO AVOID PINCHING AND IT WILL TAKE
AT LEAST TWO PEOPLE TO ASSEMBLE THE TRAMPOLINE
STEP 1
- Frame layout
There are a total of 20 pieces of steel tubing parts that is needed to assemble the frame. All parts
with the same part # are interchangeable and have no
“
right
”
or
“
left
”
orientation, To connect the
parts, simply slide a section tubing that is smaller on one end into the adjacent section that has a
larger opening. These joints are called
“
connector points
”
.
..
A. Lay out all frame sections in a
circle as shown (see figure 1)
B. You should have the following
parts:
I. Top Rail (# 4) 4 pieces
II. Top Rail with Leg Sockets
(# 3) 4 pieces
III. Leg Base (# 5) 4 pieces
IV. Vertical Leg Extensions
(#6) 8 pieces
STEP 2 -
Support Assembly
A. Slide all Vertical Leg Extensions (6) onto the
Leg Base (5) as shown.
Summary of Contents for GE030
Page 1: ...Assembly User Manual 12 14 Family Trampoline GE030 31 ...
Page 2: ......
