background image

 
 
 

COPYRIGHT @ 2013 Shenzhen V-CHIP MICROSYSTEMS Co. Ltd                                                  VERSION: VT-CC1120PL-2013 

VT-CC1120PL-433M 

IMPORTANT NOTICE

 

V-CHIP  MICROSYSTEMS  Co.  Ltd  (below  called  V-CHIP)  reserve  the  right  to  make  corrections, 

modifications, enhancements, improvements, and other changes to its products and services at any time and 

to discontinue any product or service without notice. Customers should obtain the latest relevant information 

before placing orders and should verify that such information is current and complete. 

V-CHIP warrants performance of its hardware products to the specifications applicable at the time of sale 

in accordance with V-CHIP’s standard warranty.   

V-CHIP does not warrant or represent that any license, either express or implied, is granted under any 

V-CHIP patent right, copyright, mask work right, or other V-CHIP intellectual property right relating to any 

combination, machine, or process in which V-CHIP products or services are used. Reproduction of V-CHIP 

information in V-CHIP data books or data sheets is permissible only if reproduction is without alteration and 

is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this 

information with alteration is an unfair and deceptive business practice. V-CHIP is not responsible or liable 

for such altered documentation. Information of third parties may be subject to additional restrictions. Resale 

of V-CHIP products or services with statements different from or beyond the parameters stated by V-CHIP 

for that product or service voids all express and any implied warranties for the associated V-CHIP product or 

service and is an unfair and deceptive business practice. V-CHIP is not responsible or liable for any such 

statements. 

Summary of Contents for VT-CC1120PL-433M









Reviews: