- 9 -
Installing and Setting Up
1.
Connect the device to a power outlet and charge it
for at least 4 hours. Make sure the battery is fully
charged on first use. (
Important: DC 5V
)
2.
Turn on the power switch on the back and screen
will be lit up.
3.
External Sensors:
Mount the sensor modules to the
valve stems one by one, meantime check the data
(air pressure value / temperature value) showing on
the corresponding position of the display screen is
normal or not.
Internal Sensors:
Please take device to a tire-repair
workshop and let professionals
1
Dismount tires.
2
Replace the valve stems with sensor modules.
3
Bleed and fill the tire one by one.
4
At the same time observe the data (air pressure
value / temperature value) showed on the
corresponding position of the display screen is
