USER MANUAL
V. BRØNDUM A/S
RONDA
Safe Change vacuum cleaner
12
IMPORTANT!
The machine must not be
connected to the power supply
during service and cleaning.
Replacing Collection Container incl. HEPA Filter
When the suction power starts to drop and the indicator light on the vacuum cleaner flashes continuously, it is
time to replace the collection container.
Follow this procedure to replace the collection container incl. HEPA filter:
1.
Seal off the collection container by fitting on the blanking plug.
2.
Turn off the vacuum cleaner.
3.
Open the four clips that hold the collection container onto the vacuum
cleaner.
4.
Lift off the collection container and dispose of it according to applicable
guidelines for the collected material.
5.
Remove the packing from the new collection container, inspect it and
make sure that the gasket at the bottom of the container is intact.
6.
Put the collection container in place on the vacuum cleaner.
7.
Fasten the collection container by means of the four clips.
8.
Remove the blanking plug from the collection container before use.
Cleaning and Maintenance
The collection container must always be replaced after use due to the
risk of self-ignition.
Read the section regarding safety before cleaning and maintaining the
vacuum cleaner.
The easiest way to clean the machine is following:
Wipe the exterior of the machine with a dry or damp cloth.
Maintaining the vacuum cleaner
The vacuum cleaner is made of maintenance-free parts and therefore needs no daily maintenance, apart from
external cleaning and check that the cords and plugs are undamaged.
The easiest way to clean the vacuum cleaner is with a damp cloth. Do not aim jets of water directly at the vacuum
cleaner.
