V.Bot P4960, Operation Manual

Page: 8 / 28

RECHARGING BATTERY
7
1. To protect the rechargeable battery and lengthen its life, after the battery
is charged for 16 hours, the charging function will be cut off automatically.
After 12 hours of charging you may start using the vacuum even if the
power indication lamp is still flashing.
2. If the vacuum emits a warning buzz and stops moving, this indicates that
the battery needs immediate charging.
3. Make sure the vacuum is in the OFF position and the battery is installed.
4. Plug one end of the AC adaptor into the jack on the vacuum and the other
end into the wall outlet to charge.
5. When the batteries are fully charged the power indication lamp will stay green.
Power Indication Lamp
Plug of Charger
(d.c 17V 200mA)
Socket for Charger
GENERAL OPERATION
Preparation for Operation
To ensure the best working efficiency of the vacuum, make sure to remove
clothes, paper, and electric cords from the floor, and roll up the any curtains or
drapes that might cause the vacuum to become stuck. Should an electric cord
become entangled in the vacuum, the lamp or appliance risks being pulled to
the floor and damaged.
Do not use on the shag carpet.
Starting Operation
1. Clean the dust bin.
2. Place the vacuum on the floor and switch the unit to the ON position.
3. When the vacuum runs out of power, it will emit a buzz and stop automatically.
4. When the vacuum is not in use, or prior to recharging, make sure the
power switch is in the OFF position.