![UWELL Whirl T1 User Manual Download Page 7](http://html1.mh-extra.com/html/uwell/whirl-t1/whirl-t1_user-manual_1066114007.webp)
- 5 -
Attention
a. In case of insufficient power for high power mode, device
can still be run in medium power mode.
b. In case of insufficient power for medium power mode,
device can still be run in low power mode.
5. Battery indication function
The LED will flash green to signal the remaining battery
capacity is over 60%; blue to signal 30%-60%; red to signal
below 30%; 10 times of red flashes upon battery depletion.
6. Short circuit protection
In the case of short-circuit, the indicators will flash red 3 times
and stop working.
7. Low voltage protection
The indicators will flash red 10 times and stop working if the
battery is depleted.
8. Timeout protection
The maximum working time is 8 seconds with each draw as a
protection. In the case of exceeding 8 seconds of continuous
drawing, the device will cease working, while the LED indicators
will flash in green 5 times as a prompt.
9. Open circuit prompt
When the pod cartridge is not properly connected or not
connected, the LED indicators will flash blue 3 times to signal
open circuit.
10. Charging
While charging, the indicators will flash to signal power level:
green to signal battery level is charged over 60%; blue to
signal 30%-60%; red to signal below 30%; indicators will
stay on upon charge completion.