17. M+ INDICATOR (OAC & OEC)
This indicator will appear when memory is
containing accumulated transaction data.
18. WEIGHT PANEL
The current weight detected is shown here.
19. UNIT PIECE WEIGHT PANEL
The current unit piece weight entered is shown
here.
20. TOTAL COUNT PANEL
Total count of the current or accumulated
transactions is shown here.
POWER KEY
The power key is located at the left-hand bottom
side of the lower housing. Press this key
forward to turn scale on or backward to turn
scale off.
4. INTERNAL SETTINGS
4.1 PLACE THE SCALE
Place this unit on a hard and strong surface,
where is free from RF interference, vibration,
fire, direct sunlight and excessive
moisture.
For most accurate weighing result, always
place this unit on a level surface. If
necessary, adjust the adjustable feet
underneath the scale to obtain a level
condition.
4.2 POWER ON/OFF THE SCALE
Press
ON/OFF
forward/backward to turn scale
on/off.
4.3 INTERNAL SETTINGS
4.3.1 (OAC & OEC) Set Backlight (Option)
Status
4.3.1.1 Turn backlight on: - Power Saving Mode
a. Turn scale on.
b. Press
1
then press
ZERO
.
c. Backlight is turned on.
