NOTE:
-User only needs to press
ON/ZERO
once when setting the
value to zero. The re-zero command will be memorized
and take place when reading is stabled
5.6 TARE OFF THE WEIGHT OF A CONTAINER
When a container is used, follow the below steps to
manually tare off the weight of container and get the
net weight.
a.
Remove all loads away from platter
b.
Make sure that the
ZERO INDICATOR
is on
c.
Place the container on the platter
d.
Press
TARE
After
TARE
is pressed, the
NET INDICATOR
would appear.
Refer to
5.2
for weighing procedures. Weight displayed
under is the net weight of the subject matter. Refer
to
SPECIFICATIONS
for maximum tare range.
NOTE:
-User only needs to press
TARE
once when tare off a weight.
The tare command will be memorized and take place when
reading is stabled
Summary of Contents for AQM Series
Page 1: ......
