28
ALADIN ONE USER MANUAL
2. Switch between “On” and “Off” by
pressing the left or right button.
3. Confirm the water type with a press-
and-hold of the right button.
F
NOTE: Water type has an effect on
displayed depth. Roughly, 1bar/14.5psi
water pressure corresponds to
10m/33ft depth in salt water and
10.3m/34ft depth in fresh water.
5.1.3
User menu
Selecting the units
1. Confirm that you wish to change the
units with a press-and-hold of the right
button.
“°C” or “°F” starts to flash.
2. Switch between “°C” and “°F” by
pressing the left or right button.
3. Confirm the selected unit with a press-
and-hold of the right button.
Meters or Feet start to flash.
4. Switch between meters or feet by
pressing the left or right button.
5. Confirm the selected unit with a press-
and-hold of the right button.
Resetting the remaining saturation
WARNING
• Diving after a reset of the remaining
saturation may lead you into potentially
hazardous situations which could result in
death or serious injury. After a reset of the
remaining saturation do not dive for at least
48 hours.
• If you dive after resetting the remaining
saturation the computer will miscalculate
your decompression, which may result in
serious injury or death. Reset the remaining
saturation only if you know you will not be
diving, flying or going to higher altitude for
the next 48 hours.
• Resetting the desaturation should only
be done when there is a valid reason, e.g.
loaning the computer to somebody who has
not dived in 48 hours or more. When the
computer itself has remaining saturation
you must assume full responsibility for the
consequences of resetting the remaining
saturation.
1. Confirm that you wish to reset the
displayed saturation with a press-and-
hold of the right button.
“On” starts to flash.
2. Switch between “On” or “Off” by
pressing the left or right button.
3. Confirm the setting with a press-and-
hold of the right button.
If you have selected “Off”, “Code” and
“000” appear.
4. Set the first digit by pressing the left or
right button. Confirm with a press-and-
hold of the right button.
5. Repeat Step 4 for the next 2 digits.
If you entered the right code the
desaturation will be reset to zero
(desat off). Code: 313.
