Uwatec Aladin H, User Manual

Page: 43 / 64

43
English
ALADIN H USER MANUAL
4.2.2 Planning a decompression dive
1. Activate the dive planner.
2. Set the desired depth by pressing the
left or right button and then confirming
with a press-and-hold of the right
button. The Aladin H shows the bottom
time (no-stop time + 1 minute) and the
appropriate decompression information
or level stop data, respectively.
3. “Add” asks that you set the bottom
time. This is done by pressing the left
or right button. The Aladin H calculates
the decompression information for this
set bottom time. If a MB level (L1-5) is
selected, the Aladin H calculates the
level stop data.
CNS O
2
% values higher than 199% will be
displayed as 199%.
Ascent time greater than 99 minutes is
displayed as “– –”.
Deco stop depth deeper than 27m/90ft is
displayed as “– –: – –”.
CNS O
2
equal or greater than 75%: CNS
O
2
% symbol starts flashing.
CNS O
2
equal or greater than 100%: CNS
O
2
% symbol and CNS O
2
% value are
flashing.
MB level stop deeper than 27m/90ft: MB
level will be reduced.
4.2.3 Leaving the dive planner
By pressing-and-holding the right button at
the time field you can exit the dive planner.
This will also occur after 3 minutes without
operation.
4.3 LOGBOOK