Uwatec Aladin Gauge Operating Manual Download Page 14

Page: 14 / 20

2 Menu set 2

With menu "set 2" or SmartTRAK you can configure the following items:

Starting from the

time of day display

push

until "set 2"

appears.
Confirm that you wish to enter into the menu of "set 2" by pushing

Once entered into the menu you can scroll with

and

through the

menu.

Setting the alarm clock time

The alarm clock goes off only at the surface. "Sound" must be turned "on" in
"set 2".

1. Confirm that you wish to set the alarm time by pushing

The hours start to flash.
2. Set the hours by pushing

3. Confirm the setting with

. The minutes start to flash.

4. Set the minutes by pushing

5. Confirm the setting with

. "On" or "off" starts to flash.

6. "On" indicates "activated" (

time of day display

shows

), "off" indicates

"deactivated".

Switch between "on" or "off" by pressing

7. Confirm the selected status with

Setting the UTC offset (time zone)

UTC (Universal Time Change) zone: this setting allows you to quickly set the
watch to a new time zone without affecting the actual time setting.

1. Confirm that you wish to set the UTC offset by pushing

The hours start to flash.
2. Set the hours by pushing

(±13 hrs.).

3. Confirm the setting with

. The minutes start to flash.

4. Set the minutes in increments of 15 minutes by pushing

6. Confirm the selected status with

Adjusting the time of day

You can adjust it to your time zone either in this menu or using the UTC offset
(see above).

1. Confirm that you wish to adjust the time of day by pushing

The hours start to flash.
2. Set the hours by pushing

3. Confirm the setting with

. The minutes start to flash.

4. Set the minutes by pushing

5. Confirm the setting with

V Settings

V UWATEC

Aladin

GAUGE

Time of day

Setting

• Alarm clock
• UTC zone
• Time of day
• Date
• Display contrast
• IrDA speed (set 2 only)
• Sound
• Show Aladin

electronic ID

Range

0 - 23 h 59 min., on/off
±13 hrs., increments: 15 min.
hours:minutes

1 (low) -12 (high)
low / high
on / off

Default

12:00, off

4
low
on

Page

->14
->14
->14
->15
->15
->15
->16
->16

Summary of Contents for Aladin Gauge





















Search results

Summary of Contents for Aladin Gauge

Reviews:

Related manuals for Aladin Gauge

Brands by name

Popular brands

Uwatec Aladin Gauge, Operating Manual

Search results

Summary of Contents for Aladin Gauge

Reviews:

Related manuals for Aladin Gauge

Brands by name

Popular brands