UW
Technics
#11080-HSS Optoelectronic TTL-Converter
for MARELUX underwater housings for CANON photo cameras
USER’S MANUAL
Specifications
▪
Compatible underwater housings: Marelux
▪
Compatible photo cameras Canon
▪
Compatible TTL strobes: Inon Z-330, Z-240
Sea&Sea YS-250, YS-D1,
Sea&Sea YS-D2
(made in China)
Ikelite DS-161, DS-160, DS-125
Retra Pro
(including HSS functionality)
Subtronic Pro 270, Pro 160
▪
TTL outputs onboard: 2 optical, 1 electric
▪
HSS (High Shutter Speed sync) support manual type HSS with Retra Pro strobe (up to 1/8000 s)
▪
Continuous shooting mode (CL / CH) support: yes
▪
“Rear/Front Curtain” modes support: yes
▪
Switching “TTL / M” underwater: yes
▪
(+/-
) “Flash Exposure compensation” control underwater: yes
▪
Switching power “ON/OFF”: automatic by camera command
▪
Battery type: CR2032 (2pcs.)
▪
Current consumption (in standby mode) 0.01 mkA
▪
Battery capacity (+20
°
C): 65 000 flashes, 1 year in standby mode
▪
Recommended Fiber-optic cable type: 613-fiber core (HowShot 613L, Nauticam #26216 / #26217 etc.)
▪
Available Electric Bulkhead type (optional accessory): Nikonos, S-6, Ikelite
▪
Dual and single Electric sync cords support (Sea&Sea, Ikelite): yes
Safety Warning for Batteries usage
➢
Use batteries only CR2032 type.
➢
Batteries must be new and undamaged. Carefully check batteries before usage.
➢
To avoid leakage or explosion, always check
appropriate battery terminals position (“plus” / “minus”) before installing to the
TTL-Converter.
➢
Never expose batteries to overheating, short-circuiting, disassembling, high pressure, mechanical deformation. Save
batteries from high humidity and water. All these circumstances may cause a chemical leakage, electric shock, explosion or
fire, which can be dangerous for health.
➢
Remove batteries from TTL-Converter before longtime storage.
➢
Utilize used batteries according appropriate rules.
➢
Keep out batteries of children. Save batteries in inaccessible for children place
