C. UVC disinfection lamp standalone use
1. Connect the power supply wire according to diagram 4.
2. Press power switch “II” to open power supply, intelligent Human Body Sensing system will start
automatically, then equipment will enter into prepareation period, any personnel must leave the room
where the equipment is located. It will automatically start disinfection operation immediately when
equipment does not detect any more people moving around the equipment.
3. The device will automatically stop disinfection operation immediately if it detects there are people
moving around the equipment to safely protect human body.
4. Please shut off the power supply switch after disinfect operation is finished.
SAFETY WARNING:
1. Please read and understand this user manual before use, to ensure that the product is safely and
properly used
2. Our Company shall not be liable for product damage and other injuries caused by improper use or failure
to follow this User Manual.
3. Strictly forbid any children 0-12 years old to use this product. Users should carefully select places
without children before use and ensure that children do not touch the product.
4. Avoid the risk of electric shock during use.
5. The use of this product in gas, flammable and explosive substances, and heat source environments is
prohibited.
6. Don’t use wet hands in operating the product. Please keep the operating environment dry
7. Do not remove, repair and alter the product by oneself. Repairs and battery replacements can only be
carried out by authorized service providers and manufacturers, and repair and replacement of batteries
by authorized service providers and personnel other than manufacturers may result in injury. Replacing
the battery with the wrong model is a risk of explosion
8. Use the product only at specified voltages and frequencies
9. UV Light Hazard. Harmful to bare skin and eyes. Can cause temporary or permanent loss of vision.
Never look at the bulbs while illuminated. Any exposed skin must not be exposed to UV light
CAUTION:
UVC-Equipment Damage Hazard.
1. Ultraviolet light can cause color shift or structural degradation of plastic materials
2. Ultraviolet light can cause color shift or structural degradation of resin materials
3. Ultraviolet light can cause color shift or structural degradation of leatherwear
4. Ultraviolet light can cause color shift or structural degradation of organic compounds materials
OZONE-Equipment Damage Hazard.
1. OZONE can cause color shift or structural degradation of plastic materials
2. OZONE can cause color shift or structural degradation of resin materials
3. OZONE can cause color shift or structural degradation of leatherwear
4. OZONE can cause color shift or structural degradation of organic compounds materials
5. High concentrations of ozone for a long time can cause electronic products function damage
