Uvex EQUESTRIAN, Manual

Page: 19 / 148

and coverage zones. Our helmets consist of three main
components: The outer shell, made from high-quality plastic,
provides the helmet with stability and distributes the energy of
an impact across as large an area as possible. The inner shell
is made from a special expanded polystyrene. It cushions the
energy from an impact and dissipates it through deformation.
The comfort padding provides a high degree of wearing comfort
and helps with the fit of the helmet.
2. Purchasing an equestrian helmet
2.1 Head circumference in cm
As the starting point for choosing the right size, the head
circumference is measured a finger width above the eyebrows.
Many stores will have a head measuring tape available. The
head size (head circumference) is indicated on the helmet in
cm.
Please note: A larger helmet should never be selected for
children to grow into!
2.2 Trial fitting
It is important that the helmet noticeably encloses your head.
With the comfort padding in place, the helmet should sit firmly,
but not too tightly, on your head. You should look in a mirror
when trying the helmet on.
2.3 Correct positioning
Make sure that the helmet is positioned horizontally on your
head (Fig. 7). The helmet should not sit too far back, otherwise
the forehead will not be protected, but neither should the
Equestrian_CE_09032018_MIG_Final_NEU.indd 19 2018.03.23. 11:04:08