11
Troubleshooting: USB Hub Not Recognized
After you connect Ace4U to Raspberry Pi A+/3A+ and have power supply connected,
the orange LED should light up. If you connect USB device to the USB port on Ace4U,
the white LED should light up accordingly.
If you type “lsusb” command in the console,
you should see the 4-port USB hub get listed:
What to do if your Ace4U (USB hub) is not recognized?
If you are mounting Ace4U under Raspberry Pi A+/3A+, please make sure the
4 pogo
pins are all well contacted to testing pads
on the Raspberry Pi. Use tweezers to
gently adjust the pogo pins if necessary.