Users guide for IP-SwitchPlug801
1. Overview.
2. Main page.
3. Reset page.
4. Configuration page
5. Setting of IP-address.
6. Security aspects.
7. Controlling from PC software.
8. Default settings.
9. Technical specifications.
10. Getting started!
1. Overview
IP-SwitchPlug801 can switch the power on or off
in one 230V outlet.
Control is made with a web interface via ethernet
or from user software.
On the main page (index.htm) there are buttons for
switching on/off the outlet.
On the reset page (reset.htm) there are in addition
a button to make a temporary switching off for a
specified time
This time can be configured on the configuration
page. There it is also possible to configure the
delay to switch on after a power on.
The box can have usernames/passwords for user
and admin.
Admin always have full rights. It is also
possible to set rights for read/write for users
without password.
Chose between Basic Authorization (RFC2617)
or Digest Authorization (RFC2617).
You can add names above the button on the
web pages.
There are totally 3 different web pages.
Two are for the users, index.htm, reset.htm and
one for admin, config.htm.
