background image

Installation Guide  

Downton Toilet Unit Without Cistern 

 

 

Important Information 

 

  Read the instructions carefully. 

  Check the product for any signs of damage and remove any protective film.  

  It is recommended that a technically competent installer undertakes installation.  

  It is the 

installer’s responsibility to carry out a thorough assessment of the wall type 

and the weight of the cabinet and use appropriate fixings.  

  Care should be taken when drilling walls to avoid any hidden wires or pipes. 

 
 
Installation  

To fit a concealed cistern into the WC unit, pull the front top  
fascia away from the cabinet with equal force on each side.  
The lower front panel can now be lifted upwards away from  
the cabinet. Secure the cistern in position according to the  
instructions supplied with it.  

 

To secure the WC unit against the wall, drill through the rear  
top rail. Fix the unit in position using suitable fixings. 
 
Re-fit the top fascia panel last, after plumbing connections  
have been made and installation completed. 

 
Infill panel 

There is the option to fit a supplied infill panel. This  
should be secured in place using double-sided tape  
(not supplied) or fixed in place with screws. Ensure that  
the length of screw is suitable for the thickness of the  
infill panel and the cabinet legs. 
 
 

Care & Maintenance 

Furniture should be regularly dusted with a soft cotton or micro-fibre cloth. For more 
thorough cleaning, occasionally wipe your furniture with a soft cloth dampened with a 
mild detergent solution. Surfaces should be thoroughly dried with a lint free cloth to 
prevent watermarks. Under no circumstances should solvent cleaning agents, bleach or 
abrasive cleaning agents or cloths be used. Glass or mirrored panels should be cleaned 
using a non-solvent based glass cleaner and a soft cloth. Spills should be removed 
immediately using a clean cloth. All bathroom furniture will deteriorate through prolonged 
periods of exposure to high levels of condensation so bathrooms must be adequately 
ventilated using suitable extraction. Failure to ensure adequate ventilation may invalidate 
your guarantee. 

 

 

 
 
 
 
 
 

Summary of Contents for Downton











Reviews: