UNDERCABINET LIGHT
LUMINAIRE À INSTALLER SOUS UNE ARMOIRE
(Page 4)
LUZ PARA DEBAJO DEL GABINETE
(Página 9)
ITEM/ARTICLE/ARTÍCULO
#0494111
MODEL/MODÉLE/MODELO #UC1025-WHG-21T81-U
PACKAGE CONTENTS
Part Description Quantity
Fixture
Screws
Diffuser
Bulb
1
2
1
1
A
B
C
D
Hardware Kit
*Actual hardware may
differ from illustration.
B
A
C
Utilitech & UT Design® and Grounded in Quality® are
registered trademarks of LF, LLC. All Rights Reserved.
IMPORTANT SAFETY INSTRUCTIONS
This unit has a polarized plug (one blade is wider than the other)
as a safety feature. This plug will fit in a polarized outlet only
one way. If the plug does not fit fully into the outlet, reverse the
plug. If it still does not fit, contact a qualified electrician. Never
use with an extension cord unless plug can be fully inserted. Do
NOT attempt to defeat this feature.
WARNING: To reduce the risk of FIRE, ELECTRIC SHOCK,
OR INJURY TO PERSONS:
1. For INDOOR USE ONLY.
2. Not intended for installation in plastic cabinets.
3. The mounting surface should be flat and sturdy enough to support
the fixture.
4. Do NOT mount the light to cabinets having a material thickness less
than 1/4 in.
5. Not intended for recessed installation in ceilings or soffits.
6. Do NOT use in wet locations.
7. Do NOT use for illumination of aquariums.
8. Do NOT mount over sinks or stoves.
9. Do NOT touch, operate, or install fixture while in contact with water.
D
WARNINGS AND CAUTIONS
PREPARATION
WARNING
• Please read and understand this entire manual before
attempting to assemble, operate, or install the product.
Before beginning installation of product, make sure all parts are
present. Compare parts with package contents list and diagram
above. If any part is missing or damaged, do not attempt to
assemble, install or operate the product. Contact customer
service for replacement parts.
Soft Cloth
Phillips Screwdriver
Safety Glasses
Drill
Drill Bit 1/16 in.
Estimated Assembly Time: 15 minutes
Tools Required for Assembly
CAUTION
• DO NOT USE THIS FIXTURE WITH A DIMMING CIRCUIT.
If you presently have dimmer controls, you will need to
remove them, and replace them with regular electrical
switches. If you have a three way dimmer, you will have to
replace it with a regular three way switch. If you are
unfamiliar with electrical installations, we recommend you
have a qualified electrician do your installation.
1
