WARRANTY
of (3) years from the date of original purchase by the consumer. We will repair or replace (at our option) the unit
in the original color and style if available, or in a similar color and style if the original item has been discontinued,
application where it is on 24 hours per day, but is used in a residential environment for 3 - 5 hours per day.
Defective units must be properly packed and returned to the manufacturer with a letter of explanation and your
original purchase receipt showing date of purchase. Call 1-866-994-4148 to obtain a return authorization number
and an address where to ship your defective product. Note: No C.O.D. shipments will be accepted. The liability of
The manufacturer will
not be liable for any other loss, damage, or injury which is caused by the product. This limitation upon the liability
of the manufacturer includes any loss, damage, or injury which is (I) to person or property or otherwise; (II)
incidental or consequential in nature; (III) based upon theories of warranty, contract, negligence, strict liability,
tort, or otherwise; or (IV) directly, or indirectly related to the sale, use, or repair of the product. This warranty
Printed in China
TROUBLESHOOTING
PROBLEM
POSSIBLE CAUSE
CORRECTIVE ACTION
A
Security light comes
1. Dusk-to-dawn sensor is
on during the day.
a shaded area and is
fooled into thinking it
mounted in an area that does not allow enough
is nighttime.
light to enter the sensor. Relocate security light.
2. Dusk-to-dawn sensor
2. If under warranty, contact Customer Service.
is faulty.
Security light cycles ON
1. Dusk-to-dawn sensor is 1. Change position of light head aim light
and OFF continuously.
from the security light.
2. Put a small piece of black electrical tape over
the Dusk-to-dawn sensor control.
3. Relocate security light to a different location
Security light comes
1. Light is sensing motion 1. Make sure the sensor is not picking up moving
on for no apparent
in the detection zone.
reason at night.
2. Test the motion sensor by covering up the front
curved lens with cardboard to block the view. If
the light turns off then something in the
detection zone is triggering the sensor.
Reposition the motion sensor or change the
sensitivity (distance) of the sensor.
Lowes.com
Utilitech & UT Design® are registered
trademarks of LF, LLC. All Rights Reserved.
7