Utilimaster Corporation attempts to provide
information that is accurate, complete, and
useful. All information contained in this
manual is based on the latest product infor-
mation available at the time of publication.
However, because of the Utilimaster policy
of continual product improvement, Utilimas-
ter reserves the right to amend the informa-
tion in this document at any time without
prior notice.
This material is confidential and the prop
-
erty of Utilimaster. It is shared with your
company for the sole purpose of helping you
with the operation of the described equip-
ment.
Utilimaster makes no warranty of any kind
with regard to this material, including, but
not limited to, the implied warranties of
merchantability and fitness for a particular
purpose. Utilimaster shall not be liable for
errors contained herein or for incidental or
consequential damages in connection with
the furnishing, performance, or use of this
material.
Utilimaster expressly disclaims all respon-
sibility and liability for the installation, use,
performance, maintenance, and support of
third-party products. Customers are advised
to make their independent evaluation of such
products.
No part of this document may be photo-
copied, reproduced, or translated to another
language without the prior written consent
of Utilimaster.
Utilimaster Corporation attempts to provide
information that is accurate, complete, and
41
For Assistance Call: 800-237-7806
Parts On-line:
https://parts.utilimaster.com
Reach—Body Service Manual
Fax: 574-862-7637
Door Ajar Switch
Door ajar switches can be located at any of the doors. This type of
switch indicates when a door is open.
Removal
NOTE: Keep all hardware for reinstallation.
1. Use a Phillips head screwdriver to loosen the two screws to
remove wires.
2. Use a Phillips head screwdriver to remove the two screws and
lock nuts from switch.
3. Remove switch from mounting bracket and set aside.
Installation
1. Use a Phillips head screwdriver to secure switch onto
mounting bracket with two screws and two lock nuts.
2. Place wires on screws and tighten with a Phillips head
screwdriver.
Door ajar switch