33 of 34
03103436-A10030 Rev. B
NOTICE
Do NOT lift the casing platform straight up. The platform SLIDES out to the left toward the
servo motor side.
6. Remove the platform from the base by lifting from the inboard side (where servo motor is) and
sliding it out.
Slide the casing platform out to the left
Casing platform removed
7. Replace the evaporator coil.
Installation
1. Slide the platform into the casing base to the right.
2. Secure (1) screw at the base of the AC evaporator at the front and (1) at the rear.
3. Secure the front of the casing with (3) screws.
4. Secure (4) screws at the pass-through tubes.
5. Install the heater core.
