UTICOR MI-10, Manual, Page: 4 / 20

1 - General
The monitor has a 10,4 "TFT display with a
resolution of 800 x 600 or 1024 x 768 pixels.
The connection to the PC takes place via a
VGA interface with 15-pin VGA plug or via a
DVI interface with DVI-I Dual Link plug (24 +
1 pin) or the display port for the transmission
of digital image signals.
Optionally, the monitor can be equipped with
a resistive touch screen. The touch has a
USB interface.
Monitor with stainless steel front plate
If the monitor is equipped without a touch, the display is protected against contact and contact
with moisture and aggressive substances through a glass. There is a standard protective glass
and a visually anti-glare protective glass available.
The monitor is available with a standard or stainless steel front plate and mounting bolts on the
back. These two versions are intended for installation in a control cabinet or control panel. The
front panel has a gasket. The degree of protection is IP 65.
Page 4
Monitor Back with standard front plate
and mounting bolts
The monitors have a standard 12 VDC
power supply and are supplied with an
external 230 VAC / 12 VDC power
supply. All monitors are optional with a
supply voltage of 24 VDC or with an in-
ternal power supply of 230 VAC
available.