Industrial Ethernet Switch
Industrial Ethernet Switch
3
4
Caution
Power on the system only after confirming that the wiring is correct, to avoid damage to the equipment. It
is recommended to use the power adapter and power cable to in the package to connect the power supply.
For better transmission performance, it is recommended to use high-performance Ethernet cable to
connect the switch and powered devices.
For better protection performance, it is recommended always to make the ground connection first and
disconnect it at the end when operating the device.
Before operating or maintaining the switch, please read the user manual carefully to avoid equipment
damage caused by misoperation.
Product Installation
1)
Before installation, power off the equipment. Installation when device is powered on is prohibited.
2)
The switch supports rack/desktop/wall mounted installation. Following with the rack-mounted installation
steps:
Step a: Fix the bracket to the backside of the device with screws.
Accessories
Bracket
Screw
Step b: Install the device to the DIN rail.
3)
After above steps is completed, please use high-performance Ethernet cable to connect the switch and
the device.
4)
Check the installation and the wiring, after confirming that the connection is correct and reliable, power on
the switch.
The installation is completed.
Specifications
Items
Hardware Specifications
Downlink Port
4*10/100/1000Base-T RJ-45(Auto-MDI/MDI-X)
Uplink Port
1*1000M RJ-45/SFP Combo
1*10/100/1000Base-T RJ-45(Auto-MDI/MDI-X)
1*10/100/1000Base-X SFP
LED Indicators
1*Power, power indicator
2*Fiber Link, SFP port indicators
Dimensions (W*D*H)
163mm*110.5mm*46.5mm
Input Voltage
Non PoE switch: 12~57V DC
PoE switch: 48~57V DC
Power Consumption
≤6W (Full load without PoE)
Material
Metal shell
Installation
DIN-rail/Desktop/Wall mounted
Switch Property
Standards
IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z
Forwarding Modes
Store and Forward
MAC Table
8k, support auto learning
Switching Capacity
14Gbps/non-blocking
Packet Forwarding Rate
10.42Mpps
Packet Buffer
1M
Jumbo Frame
10k Bytes
Reliability
Surge Immunity
6kV, Standard: IEC6000-4-5
ESD Protection
6kV Contact Discharge, 8kV Air Discharge, standard: IEC61000-4-2
Operating
-40
℃
~75
℃
, 5%~95% (Non-condensation)
Storage
-40
℃
~85
℃
, 5%~95% (Non-condensation)
Power Supply
4-Port PoE+ Switch
1-Port HPoE 3-Port PoE+ Switch
PoE Standard
IEEE 802.3af/at(PSE)
PoE Power Supply Type
End-span
PoE Pin Assignment
1/2 (+),3/6 (-)
PoE Budget
30W max for each port
60W PoE for port 1, 30W PoE for
other ports
Version: V1.1, updated 2022-12-09.
The information in this document is subject to change without notice.
Every effort has been made in the preparation of this document to ensure accuracy of the contents, but all statements, information, and
recommendations in this document do not constitute a warranty of any kind, express or implied.
