Right
view
Left
view
Top view
Panel
Diagram
Please follow installation steps as below:
Please check the following items before installation, if anything missing, please contact the
dealer .
Ethernet Extender( SV unit
)
1 PC
Ethernet Extender( IPC unit
)
1 PC
User Manual 1 PC
1) Turn off the power of all related devices before the installation, otherwise the device would
be damaged;
2) Check if the Ethernet cable and other cables are connected correctly;
3) The RJ45 port of SV is supposed to be connected with Ethernet switch by Ethernet cable,
and the BNC port is connected by coaxial cable;
4) Connect the other side of coax on the BNC port of IPC. The RJ45 port of IPC is supposed
to be connected with IP camera by Ethernet cable;
5) Check if the installation is correct and device is good, make sure all the connection is
reliable and power up the system;
6) Make sure the network is working.
The product
is an Ethernet extender which can transfer Ethernet signal by Ethernet cable or
coaxial cable. It consists of SV and IPC units. This product is specially designed to meet the
long-distance HD IP transmission for security surveillance projects. This device can transfer
the Ethernet signal up to 300m through the coaxial cable, But network latency is less than
20us.The structure designing of built-in splicing slot on both sides and
magnetic attraction
as well as hanger on the bottom enables multiple installation methods of wall-
mounting,splicing and absorption. So it is a cost-effective choice for the HD network
surveillance system, transmission and application of the IOT, as well as upgrading and
renovating
projects
.
Features
Transfer 60Mbps bi-direction Ethernet signal via coaxial cable, And the transmission
distance of Ethernet signals can up to 300m;
Support
, IEEE
802
.
3u
100Base
-
TX
standard;
IEEE802
.
3
10Base-T
Low
delay rate,
less
than
20us;
Plug
and
play,
no
other software and transfer agreement needed;
Built-in splicing slot, with magnet and hanger, unique and integrated design, splicing,
desktop and wall-mounted installations available, which suits in all kinds of engineering
installation.
Ethernet Extender
User Manusal
Notice
1
2
1) Please use RG59 or above coaxial cable and Cat5e/6 cable to reach the longest
transmission distance;
2) Please use the standard coaxial
connector to avoid abnormal display
.
Installation
steps
Application
Ver1.1
IPC U
nit
SV
-U
nit
IP
Cam
era
L
CD
NVR
PoE
Sw
itch
R
G5
9
Co
axia
l c
able
Ca
t5e
/
6
Ca
t5e
/
6
Ethernet
Extender
COAX
Power
Link/Act
DA
T
A
DC 5-1
2V
POWER IN
Power
COAX
Link/Act
Ethernet Over Coax
IEEE 802.3u
100Base-Tx
Up to 300 meters
Ethernet Over Coax
IEEE 802.3u
100Base-Tx
Up to 300 meters
DA
T
A
DC 5-1
2V
POWER IN
Power
COAX
Link/Act
COAX
Power
Link/Act
IPC Unit Device
SV Unit Device
Right
view
Left
view
Top view
DC5-12V
DATA
DC5-12V
DATA
