installation
with power will damage the transmission equipment;
2) Use network cable connect PoE IP camera and 1
～
8 down link ports of product
respectively;
3) Use a network cable connect equipment up link port and NVR or computer;
4) Turn on the power of the equipment;
5) Check if the installation is correct, equipment is in good condition, the connection is
stable, then provide power for system;
6) Ensure the Ethernet equipment with power and work properly.
【
Scenario
】
1. Security surveillance system
2. Wireless AP network system
3. IP phone system
4.VoIP network telephone system
【
Accessories
】
1. 8 Ports POE Ethernet switch 1 pc
2. Power adapter 1 pc
3. AC power cable 1 pc
4. Accessory 1 set
5. User manual 1 set
Summary of Contents for UTP3-SW08-TP120
Page 2: ......
